I'm buying a clutch kit just wondering if I can do this at home. Or is there some special tools you need to get the box out. I don't own a hoist I like to do most things my self
It's awkward doing it on the ground, but not too hard. A trolley jack will be handy. The easiest way I found to get the box in and out is to undo it from the bell housing and pull it out. It is easier to get to the bell housing bolts that way.
One guy said it to hard you need a hoist I've got a trolly jack lifts 500mm. I'll be replacing the fly wheel as well. In terms of bleeding the clutch is there a tool to make it easyer
