Campo500
New Member
- Joined
- May 1, 2020
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 22
- Location
- South Australia
- Members Ride
- VY Berlina
Hey guys just picked up a v6 Berlina the other day and I’m just hoping I could have a little help, my knowledge is quite mild and I want to get the best advice possible before going out spending big money
So this is the third day I had it, she’s been running nicely, engines definitely healthy but it stalled twice on the way to work randomly, didn’t have any problems on the way home, I gave it a little booting this morning to see if I could find something and I think it possibly could be related to the coils, sparks and leads, just like my old VS which the coils were definitely screwed in that car which I replaced all 3, sparks and leads in then it ran fine, my VY with a decent amount of acceleration had some slight I guess “sluggish” to it, like it’s not going to its full potential but then I’m reading also about O2 sensors? Honestly not completely sure
the other two issues I have is my main display on the cluster there is nothing, it’s illuminated but doesn’t say anything, the other issue is related to aircon/heater, my dimisters works fine but not sure what’s going on with my aircon/heater (climate control unit in general)
the last two issues I’m just scratching my head, if someone could please give me some help it would be greatly appreciated
The climate control I genuinely have no idea what’s going on
cluster display?
https://imgur.com/I1nMv0B
So this is the third day I had it, she’s been running nicely, engines definitely healthy but it stalled twice on the way to work randomly, didn’t have any problems on the way home, I gave it a little booting this morning to see if I could find something and I think it possibly could be related to the coils, sparks and leads, just like my old VS which the coils were definitely screwed in that car which I replaced all 3, sparks and leads in then it ran fine, my VY with a decent amount of acceleration had some slight I guess “sluggish” to it, like it’s not going to its full potential but then I’m reading also about O2 sensors? Honestly not completely sure
the other two issues I have is my main display on the cluster there is nothing, it’s illuminated but doesn’t say anything, the other issue is related to aircon/heater, my dimisters works fine but not sure what’s going on with my aircon/heater (climate control unit in general)
the last two issues I’m just scratching my head, if someone could please give me some help it would be greatly appreciated
The climate control I genuinely have no idea what’s going on
cluster display?
https://imgur.com/I1nMv0B