Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Vy Calais l67 engine in a VS wagon

Copls1

New Member
Joined
Mar 3, 2016
Messages
15
Reaction score
1
Points
3
Location
Vic
Members Ride
VX SS
Hi I know it may have been asked before but I’m new to this what’s involved in putting a vy l67 motor into a VS commodore, I have everything vy l67 loom ecu, bcm ect, it’s it literally just plug abs play, any help would be appreciated.

Also my nephew has a vx l67 his wanting to put in his vy is this the same sort of deal ?
 

Phillbert

Well-Known Member
Joined
Sep 21, 2016
Messages
662
Reaction score
659
Points
93
Location
Gold Coast
Members Ride
VZ SV6, VS L67 Ute

Your answers are here in above link.
Might be easier to go with the VS wiring and extend it and get a L67 memcal for the VS....


L67 conversion into factory 4 speed auto commodore
  • If running the factory loom then several wires must be extended including:
  • Fuel injectors
  • Crank angle sensor
  • Temperature sensor
  • High flow fuel pump (walbro 255LPH EFP-057/GSS-342)
  • PCM/memcal must be recalibrated
  • Make sure you retain the L67 flexplate when purchasing the motor as the ecotec and L67 have dissimilar rotational harmonies
  • These following steps regarding wiring only apply if your undertaking a complete conversion (meaning Ecotec/Buick V6 and automatic transmission swapped with an L67 and manual transmission)
    - bridge neutral/park safety switch permanently for the car to start
    - wire up the manual speed sensor to the dash (3 wires)
    - wire the manual reverse switch to the reverse lights (2 wires)
 

_R_J_K_

Well-Known Member
Joined
Dec 20, 2008
Messages
6,155
Reaction score
1,372
Points
113
Members Ride
Zenki S14
I have everything vy l67 loom ecu, bcm ect, it’s it literally just plug abs play

Just use all the VS electronics and get an L67 memcal, the VY ECU and BCM won't work in a VS.
 
Top