wortus
Active Member
- Joined
- Dec 2, 2009
- Messages
- 1,885
- Reaction score
- 22
- Points
- 38
- Location
- Sydney
- Members Ride
- VY Series 2 25th Anniversary in Phantom Mica
Hi I just changed my engine mounts and thought I'd share how I did it as I thought it was a pretty easy job with the right tools.
I purchased a Toldeo 15mm 3/8" drive crows foot wrench from Super Cheap Auto for the task. You can get at the top nut on the inner side of the passenger side mount without having to remove anything else.
The crows foot and ratchet go in over the front of the engine sump. The only issue I had is the power cable for the starter motor gets in the way making getting the wrench in a little tricky.
I purchased a Toldeo 15mm 3/8" drive crows foot wrench from Super Cheap Auto for the task. You can get at the top nut on the inner side of the passenger side mount without having to remove anything else.
The crows foot and ratchet go in over the front of the engine sump. The only issue I had is the power cable for the starter motor gets in the way making getting the wrench in a little tricky.
Last edited: