Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VY Headlight replacement. full casing etc...

cliffo

New Member
Joined
Jan 6, 2010
Messages
9
Reaction score
0
Points
0
Members Ride
VY Executive Wagon V6
Hi all.

I would like some help/advise on how to tackle replacing the headlights on my vy exec.

bought the ss/sv8 headlight casing and am obviously looking to swap them over with the stock ones.

i have attempted. but couldnt get to all the bolts...

my mechanic told me i had to take the whole front bar off. is this true?

or is there an easier way of fixing this problem.

also if this question has been answered on this forum or on another forum i would like to know its where abouts..

thanks in advance for feedback, much appreciated.
 

0081

Member
Joined
Aug 10, 2008
Messages
493
Reaction score
3
Points
18
Location
Sydney
Members Ride
VY s m5 supercharged
yep the bar needs to come off.
 

Dr HaxZaw

New Member
Joined
May 6, 2010
Messages
1,462
Reaction score
13
Points
0
Location
Sydney
Members Ride
R34 GT-T
front bar has 2 screws each side in the wheel wells, three up top (open the bonnet and youll see them) and 2 plastic ones under the number plate... thats where they were on my S so i figured theyll be pretty much the same for the exec
 

cliffo

New Member
Joined
Jan 6, 2010
Messages
9
Reaction score
0
Points
0
Members Ride
VY Executive Wagon V6
okay fantastic guys thanks especially "dr haxzaw" i will tackle this with a mate soon :)
 

2004_VZ_Acclaim

Bonkers
Joined
Jan 18, 2010
Messages
107
Reaction score
0
Points
16
Location
Brisbane,QLD
Members Ride
VZ Acclaim

cliffo

New Member
Joined
Jan 6, 2010
Messages
9
Reaction score
0
Points
0
Members Ride
VY Executive Wagon V6
oh thanks heaps for the thread, most likely the vz and vy bumpers are pretty much the same, and im sure that when i looked at doing it before i have noticed all those screws, i just wasnt sure if there was ones underneath and what ever, and where to start and what not, so that thread will point me in the right direction you would hope ;) thanks
 
Top