Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Vy idle bearing/ engine pulley

tye730

New Member
Joined
Oct 8, 2010
Messages
20
Reaction score
0
Points
0
Location
melbourne
Members Ride
Vy S s2
Hey guys trying to take off the ribbed idle bearing just bellow the coil pack on the v6 and I can't get the bolt off iv done it before but it's been awhile I can't remember which way to loosen it iv broken 3 13m rachet bits so I thought I would ask now thanks
 

colgf

New Member
Joined
Sep 6, 2007
Messages
351
Reaction score
3
Points
0
Members Ride
s/charged v6 HR Holden, s/charged v6 EH Holden,
i think it is a L/H thread this pulley bolt??? I made the same mistake ended up breaking the bolt , had to drill out the bolt tail out & drill hole for a longer bolt with a nut on the back , right thru the housing bracket. These assmblies are very dear to buy too!!! Typical- anything that breaks easily then GMH finds out & doubles the price of it!!!!!
 

tye730

New Member
Joined
Oct 8, 2010
Messages
20
Reaction score
0
Points
0
Location
melbourne
Members Ride
Vy S s2
Thanks it is a anti clockwise thread btw the housing to hold the bearing is only $30 from Holden just thought I would let u know
 

myvyute

New Member
Joined
Jul 18, 2010
Messages
6
Reaction score
0
Points
0
Age
29
Location
Mildura Vic
Members Ride
vy II calais
haha yea i had the same problem with the idler pulley aswell
 
Top