glowworm
Member
- Joined
- Oct 14, 2006
- Messages
- 300
- Reaction score
- 4
- Points
- 18
- Members Ride
- vt exective
OK for all you guys that know i was putting a VY IRS into my VT series2 ,
Finnished it today was not that difficult .Everthing bolted up perfect ,but did have to get a VY tail sharft as the VT one is different ,also my exhaust will need replacing as it now hits one of the brakets ,just a little has about 2 min clearance, with car running it just hits it ,other than that everything is good .
I did this by my self so if anyone want to do it you can give yourself 2 days just taking your time ,and some good jacks to help lift it into the right spot,,hope this helps you make up your mind if you want to do it ...:thumbsup:
Finnished it today was not that difficult .Everthing bolted up perfect ,but did have to get a VY tail sharft as the VT one is different ,also my exhaust will need replacing as it now hits one of the brakets ,just a little has about 2 min clearance, with car running it just hits it ,other than that everything is good .
I did this by my self so if anyone want to do it you can give yourself 2 days just taking your time ,and some good jacks to help lift it into the right spot,,hope this helps you make up your mind if you want to do it ...:thumbsup: