VY S2 Calais memory seat bypass into VY S1 Berlina

[BerryRedVY]

Hey guys first post on here although I have used the site for a few years.
So I recently got some VY S2 8 Way Memory Calais leather seats for my VY Berlina S1 and went to plug the Drivers seat in and realized the plugs were different.
The car side is the 2 Wire grey plug with an orange wire and a blue wire whilst the Seat side plug has the following wires from top to bottom left to right in picture Seat2, Yellow - Grey Line, Red - Orange Line, Thin Black wire - thin Grey Line, Thick black wire, Thick red wire, Green wire - black line, black wire - grey line, red wire - blue line, black wire - brown line.
I also am missing the memory module so was wandering if anyone has any Idea on how to bypass the memory module to get just the manual 8 way controls working?
Thanks in advance!

If its impossible to do the above is it possible to get a passenger side seat base and put the drivers side seat onto the passenger base along with changing the side to which the Seatbelt and pretensioner and side panel with controls mounts?
Thanks once again

 

[Joker999au]

Car plug
blue is live
orange is ground

Yellow - Grey Line mirror
Red - Orange Line mirror
Thin Black wire-thin Grey Line mirror
Thick black wire ground
Thick red wire live
Green wire - black line BCM
is a green/white wire
black wire - grey line(white?) Seat belt alarm
red wire - blue line ignition
black wire - brown line ground

 

[Joker999au]

Don't quote me but that's what I can find
Power acc and earth should be enough. And seat belt alarm obviously.

 

[Joker999au]

Not advisable to swap it as it s2 which has side airbag.
If it goes off being in the middle of the car who knows what it would do

 

[BerryRedVY]

Don't quote me but that's what I can find
Power acc and earth should be enough. And seat belt alarm obviously.

Okay sweet so I am understanding correctly I wire it like this correct?
Car Blue live to thick red live on seat plug
Car orange ground to thick black ground on seat plug
Does the black - brown line ground also get wired to the Car Orange ground?
Also as I am unsure of the seatbelt wiring where would I wire the black wire grey/white seatbelt alarm plug to?

 

[BerryRedVY]

Not advisable to swap it as it s2 which has side airbag.
If it goes off being in the middle of the car who knows what it would do

Okay no worries, I wasnt going to use the whole seat with side airbag going being toward the middle, was just wandering if I could use a passenger seat base/rails with electric motors and controls then change the side to which the seatbelt pretensioner and controls mount onto, obviously the passenger side controls wont fit so I would source a drivers side one
Thanks for your replies they will get me on the right track