pinkmilkguy
New Member
- Joined
- Aug 18, 2023
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 31
- Location
- Innisfail, Queensland
- Members Ride
- VY Commodore Ute 3.8L
Hey everyone,
Recently purchased some front seats out of a VY acclaim to replace the seats in my ute. The seats all bolted up fine and the pretensioner’s plugged in fine. However, the driver’s seat has electric height adjustment and my ute didn’t. The plugs are slightly different with the sedan having an extra pin, and I’m wondering if it’s possible to splice it in to the existing loom? I don’t have the loom from the sedan but I have the plug my ute is missing. If this isn’t possible will I have any issues leaving it disconnected?
Hoping someone can help or point me in the right direction
Recently purchased some front seats out of a VY acclaim to replace the seats in my ute. The seats all bolted up fine and the pretensioner’s plugged in fine. However, the driver’s seat has electric height adjustment and my ute didn’t. The plugs are slightly different with the sedan having an extra pin, and I’m wondering if it’s possible to splice it in to the existing loom? I don’t have the loom from the sedan but I have the plug my ute is missing. If this isn’t possible will I have any issues leaving it disconnected?
Hoping someone can help or point me in the right direction
Last edited: