Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VY SS Clutch Fail Problem

ONROADYNO

Member
Joined
Mar 12, 2014
Messages
121
Reaction score
7
Points
18
Location
Perth
Members Ride
VZ Thunder
I have a standard VY SS Ute and just went to put into gear and as I did the clutch pedal went to the floor.
I pressure bled the slave cylinder and problem still there.
Any Ideas?
What is a good clutch/pressure plate to buy if I need a new one.
I drive normally till my inner bogan rears its head!

Thankyou in advance.
 

Dirbatua

AWOL!
Joined
Apr 6, 2003
Messages
3,910
Reaction score
167
Points
63
Age
36
Location
S/e Victoria
Members Ride
VX SS Series 2
I have a standard VY SS Ute and just went to put into gear and as I did the clutch pedal went to the floor.
I pressure bled the slave cylinder and problem still there.
Any Ideas?
What is a good clutch/pressure plate to buy if I need a new one.
I drive normally till my inner bogan rears its head!

Thankyou in advance.

Master or slave cyl is probally rooted if the pedal has no pressure.
 

ONROADYNO

Member
Joined
Mar 12, 2014
Messages
121
Reaction score
7
Points
18
Location
Perth
Members Ride
VZ Thunder
Dirbatua, thankyou for your input.

The pedal does have pressure but not enough to lift the pressure plate 100% off the clutch.

It really felt like there was a master cylinder bypass. I suppose if I change that and no improvement the gearbox comes out next.
 

ONROADYNO

Member
Joined
Mar 12, 2014
Messages
121
Reaction score
7
Points
18
Location
Perth
Members Ride
VZ Thunder
Pretty sure its the slave cylinder but will be changing clutch and rear main at same time.
Any recommendations on what clutch to get.
The car is Granpa spec and I drive normal mostly with the occasional burnout.

Thankyou.
 
Top