Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VY Stereo wiring

robbie_1024

New Member
Joined
Jun 15, 2011
Messages
1
Reaction score
0
Points
0
Location
Sydney
Members Ride
VY Commodore
Hi all

New to the forum, im not sure if this has been covered previously on here or not, but i have a small problem and hoping someone can help.

im wiring up an aftermarket head unit in my VY. the connector on the new unit is an iso but the wiring arrangement is different to the standard one. im sure i could find a way around that (possibley cut and solder them in correct places) my question is which wires do i use on the standard harness for the steering wheel controls. on the new harness i have 3 wires for steering controls

Key1 -5V (brown)
Key2 -5V (Pink)
GND (black)

Also which wires on the standard harness do i connect to the Ant wire on the new harness.

i have attached pics of both wiring diagrams if that helps.

thanks to all in advance
 

Attachments

Guya2209

New Member
Joined
Aug 23, 2016
Messages
2
Reaction score
0
Points
1
Location
Busselton Western Australia
Members Ride
VY II Equipe
Is this wiring diagram relevant to the blaupunkt 6 stacker system in the VY series 2? What I am trying to do is install an aftermarket head unit I have that has self learn for the steering wheel remote I have the 3 wires coming from the steering remote plug on the head unit labelled ground, input 1 and input 2. I'm not sure of the colours but I know only the ground and input 1 are connected in the vehicle I'm taking the unit out of. Basically I want to know what wires I should tie into on the existing wiring harness.
 
Top