Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VZ manual cruise control problems.

Yiffington

New Member
Joined
Oct 16, 2018
Messages
2
Reaction score
0
Points
1
Age
27
Location
Perth
Members Ride
VZ 5.7 SV8
Hey guys I'm on my last straw here I've tried every trick I can think of to fix this damn cruise control. I've got a VZ SV8 manual and the cruise enabled but wont set. Sometimes the set will flash on and then off when you try and set it but generally nothing happens. I've tried cruise diagnostics and it says apply the brake before attempting to enable cruise. Basically what I need to know is which of the two brake switches is for the cruise control? The one with the single 4pin connection or the one with 2 2pin connections? Also my car only has one plug going to the switch with 2x 2pin connectors...

Tldr: Which switch is which on a vz with cruise control!

Also sorry if this is in the wrong location, this forum has a funny organization system.
 

Attachments

  • 15396771920604014974421959800593.jpg
    15396771920604014974421959800593.jpg
    67.5 KB · Views: 120

05sszute

New Member
Joined
Jun 12, 2018
Messages
7
Reaction score
0
Points
1
Age
44
Location
South Australia
Members Ride
Vz ssz commodore ute
Mine gave me the same message. Then I was at the traffic lights and someone ran up and told me I had no brake lights. Blew the fuse. Replaced at and then cruise worked again. Could just be your stalk also.

Not sure on the swithces.
 

Yiffington

New Member
Joined
Oct 16, 2018
Messages
2
Reaction score
0
Points
1
Age
27
Location
Perth
Members Ride
VZ 5.7 SV8
Yea all my brake lights are working fine. The error only happens when im in diagnostic mode. Ive got a brand new indicator stalk installed!
 
Top