Vz ss just stopped

[dussty]

Hi all. Just in time for Christmas, my 06 ss ute decided to just stop, pulled up to a gate and opens the door and it just turned off. As if the key was turned off. Ignition on, it says no fuel, and fault, srs fault, traction fault( although it didn’t have traction control) a small X on the aircon screen and a service vehicle soon alert. Throwing up a few codes (u0140, u2107) a few other codes that read “pcm data lost” “abs data lost “battery voltage to low””not okay to start recieved from pcm” any one had a problem like this?

 

[billsmith151@gmail.]

Hi all. Just in time for Christmas, my 06 ss ute decided to just stop, pulled up to a gate and opens the door and it just turned off. As if the key was turned off. Ignition on, it says no fuel, and fault, srs fault, traction fault( although it didn’t have traction control) a small X on the aircon screen and a service vehicle soon alert. Throwing up a few codes (u0140, u2107) a few other codes that read “pcm data lost” “abs data lost “battery voltage to low””not okay to start recieved from pcm” any one had a problem like this?

Sounds like the modulator

 

[dussty]

how do you tell, everything still works. windows, locks, aircon, alarm system

 

[RiCeY]

Can you communicate with ECM PIM with scan tool?

 

[dussty]

Yes, I can communicate with the ecu, pcm AND the bcm.

 

[uniacidz]

Sounds like BCM

Any life at all? Security light flashing after remote disabling?

 

[dussty]

Everything works, elec windows, stereo, aircon, car alarm, lights,wipers.after a little more digging There was a fault with the abs showing a U2107 code and one for the transmission U0140

 

[uniacidz]

Read up on ABS module failure

Might be the issue then

 

[dussty]

So after a bit more digging, I got ahold of a test light and found there is no power going to the ecm, eng ssr, ing/odd and even, engssr 2 fuse's. there is power to engine controls relay and starter relay

 

[RiCeY]

ECM must have power or it wouldn't communicate.