VZ UTE TOW BAR INSTALL HoW????

[rlg999]

Has any 1 got any pics of the under side where it should bolt up
is there any holes pre-drilled from the factory???
any help appreciated
tjm wouldnt fit because its not a brand new tow bar!:hmmm:

 

[rlg999]

the bar is from a vy maloo im thinking all utes from vu-vz are the same (hopefully)

 

[Realway]

Drill half inch holes where the little punch marks are at the rear of the tray. Two on passenger side three on drivers. Towbar should bolt straight on underneath.

 

[Not_An_Abba_Fan]

Did you get the reinforcing plates that go in the tray as well? As above, there are dimples in the tray where you drill.

 

[rlg999]

Yeah i got all the plates n bolts just wasnt sure where to drill thanks for the help

 

[Marcus28]

I pulled the towbar off my cousins vz ute today to put onto my vz ute and he had bolts running from above the tray?? Also did not have the reinforcing plates, will it be safe to use without? Cheers guys

 

[Robert Kleem]

Drill half inch holes where the little punch marks are at the rear of the tray. Two on passenger side three on drivers. Towbar should bolt straight on underneath.

Hi, just wondering where the bolt spacers go? There different sizes so thinking in the chassis? Can't find anything on YouTube

 

[Fu Manchu]

check your messages.

 

[Trevor loves holden.]

https://www.google.com/url?sa=t&rct...QTHD488L.pdf&usg=AOvVaw0qQUcszFZdc3pu6FTrOHFn