ephect
Donating Member
- Joined
- Jul 27, 2006
- Messages
- 5,923
- Reaction score
- 15,539
- Points
- 113
- Location
- Melbourne
- Members Ride
- VS Acclaim V6
I need some advice, I went to renew the thermostat, and ended up with 2 sheared bolt heads. I've tried soaking with CRC, easy outs which broke in one of the bolts. I'm avoiding drilling out the other one.
I just finished renewing the LIM gaskets so I don't want to remove the manifold if possible
So I'm here going to weld a washer to the thread first, then a nut to them remove the remaining bolt.
My question, besides the battery, do I need to disconnect the ecu, bcm, abs etc before I begin welding?
I just finished renewing the LIM gaskets so I don't want to remove the manifold if possible
So I'm here going to weld a washer to the thread first, then a nut to them remove the remaining bolt.
My question, besides the battery, do I need to disconnect the ecu, bcm, abs etc before I begin welding?