WH 2001 indicator arm

[chip]

Can anyone tell me if the WH and WH2 indicator arms are interchangeable? Holden only keep the VX round type now, ten pin.

 

[Nut Kracker]

I'd say they are interchangeable.
According to this one....VR,VS,VT VX Series 1 & WH INDICATOR STALK (WITH CRUISE) "ALL VR. VS, VT & VX SERIES 1 (SEDANS, STATESMANS, UTES & WAGONS)" must use 7 pin, I think.
So it stands to reason, that from the Series 2 on, they must have been 10 pin and the WH series must be 10 pin as well.

If yours is ten pin, then by all assumption, the VX one you are talking about, should fit..........Maybe.

 

[oska]

they are different i fitted s2 stalks and modified them to work

the connectors are different

this is what i did

http://forums.justcommodores.com.au...2/201785-vxs2-vy-indicator-stalk-into-vt.html

 

[Nut Kracker]

Well....I did say "maybe".
But I'd say the WH and WH2 would be interchangeable.

 

[chip]

Cheers, I'll have to get one from GMH and fit it, all the functions worked ok oksa?


Sent from my iPad using Tapatalk

 

[NSTG8R]

Well....I did say "maybe".
But I'd say the WH and WH2 would be interchangeable.

they wont work without mods...WH Series 2 use the same stalks as VX Series 2, WH Series 1 and VX Series 1 use the earlier style stalk.

If you can't buy one new then wreckers would be your best bet otherwise you'll have to modify your wiring to run the Series 2 stalks

 

[chip]

CBF donin all that!
I'll look around.

Sent from my GT-I9100 using Tapatalk

 

[Drewie]

CBF donin all that!
I'll look around.

Sent from my GT-I9100 using Tapatalk

Here you go Holmart have them... $29

VR,VS,VT VX Series 1 & WH INDICATOR STALK (WITH CRUISE)

 

[chip]

Only problem is I need ten pin plug.
Thx for the help anyway.

Sent from my GT-I9100 using Tapatalk

 

[chip]

I'll give em a ring and see if they have ten piners!

Sent from my GT-I9100 using Tapatalk