parians
New Member
- Joined
- Sep 25, 2008
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Members Ride
- WH Series II Statesman
Hi,
I have replaced the heater valve in the engine bay but still no heat from the heater (climate control). Is there any other blend motor/vacuum actuator that will stop heat? Fan works, motor gets to temperature, I can feel hot water at the valve (under bonnet). What other common things fail that may effect this? As far as I can remember the heater just stopped i.e. working one day not the next - it didnt slowly start getting colder so I dont think there is a blockage.
Many thanks,
PA
I have replaced the heater valve in the engine bay but still no heat from the heater (climate control). Is there any other blend motor/vacuum actuator that will stop heat? Fan works, motor gets to temperature, I can feel hot water at the valve (under bonnet). What other common things fail that may effect this? As far as I can remember the heater just stopped i.e. working one day not the next - it didnt slowly start getting colder so I dont think there is a blockage.
Many thanks,
PA