WH Statesman or VT/VX Door Interlock

[VFSV6FORME]

Im working on my son's car because the rear drivers side door actuator is no good and when I pulled the trim off, I noticed one of the rods was hanging off plus the actuator itself was stuffed. Now i want to ordered a second hand lock/actuator from ebay but I urgently need the below because I have had 2 of them break. the photos below shows the plastic clip which is needed to keep the rods in place in the door lock mechanism.the one below has been super glued together to show you what it looks like.

Where can you buy these from?







Thanks

 

[Aussie Trev]

If you want new probably your local Holden dealer would be the only option, otherwise a wreckers if you are happy with used ones.

 

[VFSV6FORME]

If you want new probably your local Holden dealer would be the only option, otherwise a wreckers if you are happy with used ones.

Wow Can you still get them at a Holden dealer. Yes NEW would be better as the original ones crumbled in my hands

 

[accentstencil]

You might be able to get them from Holden but lately everything I've enquired about is discontinued.

 

[VFSV6FORME]

You might be able to get them from Holden but lately everything I've enquired about is discontinued.

Only last week my Son purchased the boot lock from Ebay (lions Den SA) for a WH 6 Cyl Statesman. I hope you can get these plastic clips new as old they are weak

 

[VFSV6FORME]

Cant find them on ebay. eeeeeek!

 

[Aussie Trev]

Have you tried Rare Spares?

 

[VFSV6FORME]

Have you tried Rare Spares?

NO! Didn't think about them. I will keep them as the last choice otherwise I will have to make something. I dont know why GM made them so weak!. The system Holden use on the VE and VF is impossible to break or damage. I had to change a rear Actuator on the cheap VE I purchased and it was good and again it was impossible to damage or break.

 

[Aussie Trev]

Could you make these Ford ones work?
https://www.ebay.com.au/itm/FORD-FA...398471?hash=item4d6fb1b307:g:wVwAAOSwxo9aqect
Just never tell anyone you used Ford parts though if they do hey
Or perhaps these from a HQ
https://www.ebay.com.au/itm/Holden-...526514&hash=item2cc39b26e5:g:we8AAOSwQS1aIPNu
These are supposed to fit GM and have measurements on the pic
https://www.ebay.com.au/itm/20x-Nyl...m=153377039029&_trksid=p2047675.c100009.m1982

 

[VFSV6FORME]

These are supposed to fit GM and have measurements on the pic
https://www.ebay.com.au/itm/20x-Nylon-Door-Lock-Rod-Clip-Chrysler-3454221-4658677-Fit-GM-8891030-5-32-4mm/153377039029?_trkparms=aid=777003&algo=DISCL.MBE&ao=1&asc=20140117125611&meid=cc872af2151a4a3783b728d043402d46&pid=100009&rk=2&rkt=6&sd=332843184055&itm=153377039029&_trksid=p2047675.c100009.m1982

These could be close.