Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

WH Wheel alignment specs

alby1976

Member
Joined
Mar 23, 2005
Messages
61
Reaction score
2
Points
8
Age
48
Location
South Australia
Members Ride
WH Grange Gen3, VF Calais V Wagon, VY Calais L67
Hey guys.

I have a 2000 WH Grange, does anyone know what the wheel alignment specs are? or have a sheet that I can print out.

Every time I get a wheel alignment, it seems I have a different car, yesterday it was a WL Statesman with FE2, and they didn't even do the rear wheels, then I pointed out that it had 4 point adjustable bushes fitted, so I have to go back, but would like the correct specs for them to aim at.
 

BlackVXGTS

Well-Known Member
Joined
Aug 14, 2004
Messages
5,808
Reaction score
2,881
Points
113
Location
Melbourne, SE
Members Ride
GEN-F2 GTS A6, VS Clubsport 185 A4
From the Holden Service CD:

The toe-in specification is deliberately quoted as an angle because wherever possible toe-in should be measured in degrees. Refer below for the recommended wheel alignment settings. These settings are at curb weight, which is the vehicle
in a condition of full fluids, full fuel, no people or luggage.

Front Toe-in Degrees Total 0°10' ± 0°10'
Degrees Per Wheel 0°05' ± 0°5'
Camber – 0°30' ± 0°20'
Caster 7°45' ± 1°15'

Rear Toe : 0 ± 1mm (0°± 0º10mins)
Camber : -1°30mins to -2°30mins
Torque Settings : 65 ± 5Nm
 
Top