Stewart1000
work done by ME
- Joined
- Sep 4, 2005
- Messages
- 797
- Reaction score
- 9
- Points
- 0
- Age
- 34
- Location
- vic
- Website
- www.justcommodores.com.au
- Members Ride
- VL twin turbo. VN5L. old jeep, **** mondeo.
i have just had my car on the dyno yesterday.
1987 VL series 2 SL with calais bits here and there
i have the car running a bit rich, the afm giving out 2.15v
an xf throttle body with vn air ducting shortened and a vn air box lid with the standard vl bottom with standard air inlet.
extractors amd 2.5" straight through with lucky muffler.
water pump, fan, power steering pump all connecter. no air con.
5 speed manual gearbox, i just replaced all bearings appart from needle roller.
LSD disc break diff.
17x7.5" 235 on rear at 50psi
dyno run was done in 2nd gear
was about 21 degreese with fan in front of car
i made sure everything was showing good signs, only code i was getting was the starter circuit.
so how much do you think i got on the dyno???
700th post!
1987 VL series 2 SL with calais bits here and there
i have the car running a bit rich, the afm giving out 2.15v
an xf throttle body with vn air ducting shortened and a vn air box lid with the standard vl bottom with standard air inlet.
extractors amd 2.5" straight through with lucky muffler.
water pump, fan, power steering pump all connecter. no air con.
5 speed manual gearbox, i just replaced all bearings appart from needle roller.
LSD disc break diff.
17x7.5" 235 on rear at 50psi
dyno run was done in 2nd gear
was about 21 degreese with fan in front of car
i made sure everything was showing good signs, only code i was getting was the starter circuit.
so how much do you think i got on the dyno???
700th post!
Last edited: