what head should i put on to an rb30

[HARVZ-6]

you only have a few options, 20, 25 or 26

all take modifying to fit properly its all down to how much money you want to spend

at the end of the day while its a 3l n/a your still not going to make big figures and you still will get beaten by a 500 buck vn sh**box

 

[rb26dett]

Im hearing a few cars are making good power with an rb30 head. Turboed ofcourse.

 

[_R_J_K_]

but on a more serious note. what head is easiest to put onto an rb30 bottom end

An RB30 head.

 

[Nackerz]

An RB30 head.

GOOD CALL!!!

Mate there is a single cam vl turbo pulling over 1000HP on youtube. you should take a look. and thats only a single cam.....so don't think the single cam wont get you big numbers.....BECAUSE it will

peece

Heres the link

http://www.youtube.com/watch?v=-RH2qKiwv4g

 

[Dr.304]

Get an RB25 head. This means that u have the DOHC on the 3.0L bottom. This has been done several times before with great results.

RB30DET. Makes great power and can rev harder then the SOHC RB30ET.

 

[vn_v6]

mate, u NEED DA NEONS ULEH CHICKS LOVE NEONS!! and da subbis in da back bro far out, pamela anderson wll cream with neons uleh, lol nah, seriously, single cams are actualy pretty good, cheaper to buy a bigger bump stick for aswell, so yeah, go the SINGLE

 

[Dum*P*ster]

mate, u NEED DA NEONS ULEH CHICKS LOVE NEONS!! and da subbis in da back bro far out, pamela anderson wll cream with neons uleh, lol nah, seriously, single cams are actualy pretty good, cheaper to buy a bigger bump stick for aswell, so yeah, go the SINGLE

Sounds creamy

 

[kylej]

truely go save up money and do it proply.
note for u though either way if u do ur engine ur gearbox/transmission is gunna **** it self and ur diff isnt going to last long.
oh and HARVZ-6 i had a r31 skyline with 400 thousand k's on it stock as all with a 5 speed manual and i left vn's for dead until i rolled it 3 times

 

[peckzz]

tell ya what to do, go to the auctions, find a wrecked skyline r32, gtr would be the way to go, use the suspension, diffs, gear box and engine, that way you have a 4wd vl, seen it done b4, alot of money but

 

[vn_v6]

4wd VL? why dont you just fix the r32?? its lighter and all, and 90% of the stuff wont even bolt up, and he wants just the head not to turn it into a muzzilla