Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
what makes bog crack???
- Thread starter ari666
- Start date
soop
Banned
- Joined
- Nov 11, 2008
- Messages
- 3,847
- Reaction score
- 59
- Points
- 0
- Location
- Smithton, Tasmania.
- Members Ride
- 2003 SS Commodore Series II
Or just fix the dent to start with! 
the_boozer
no more VK
- Joined
- Nov 7, 2009
- Messages
- 1,510
- Reaction score
- 749
- Points
- 113
- Age
- 51
- Location
- Shitsville Morwell
- Members Ride
- hilux
grind it all off and start again 36 or 40 on the air sander will do it until its shinny clean and use metal mend or fibro-fill as the base layers as all ready suggested get a metal file and find the high and low spots and adjust as required with a hammer and dolly , clean and apply metal mend .
I like to get in as its just turned hard with a course bog file and carefully file off the excess and base shape it be carefull let the file cut it off if its rolling off it still to soft, then use body filler over the metal mend after its cured and shaped. then prime
I like to get in as its just turned hard with a course bog file and carefully file off the excess and base shape it be carefull let the file cut it off if its rolling off it still to soft, then use body filler over the metal mend after its cured and shaped. then prime
ari666
250,000 hits
- Joined
- Mar 10, 2009
- Messages
- 11,835
- Reaction score
- 128
- Points
- 63
- Location
- melbourne
- Members Ride
- 1966 impala, R32 GTR
lol, ok so basically the plan is to get all the shite off, apply vast amounts of either fibreglass or metal filler (repairing the dents is not an option cos the skin is fragged and its a 2 piece inner and outer skin i cant get a dolly behind) then bog the final amount.
long term goal: find a new boot.
p.s. soop, dude. i answered your speed file question 3 times now i have a speed file. it was dead flat each time i blocked it back, but fried up when the paint went on.
long term goal: find a new boot.
p.s. soop, dude. i answered your speed file question 3 times now
i have a speed file. it was dead flat each time i blocked it back, but fried up when the paint went on.
soop
Banned
- Joined
- Nov 11, 2008
- Messages
- 3,847
- Reaction score
- 59
- Points
- 0
- Location
- Smithton, Tasmania.
- Members Ride
- 2003 SS Commodore Series II
LOL sorry man. I can't see at the best of times. I miss 90% of things posted on here.
Best bet is, put a little filler in. Sand it back. Add a little more, sand it back. and so on untill its flat. DOOOG of a job but thats the only way to do it.
Best bet is, put a little filler in. Sand it back. Add a little more, sand it back. and so on untill its flat. DOOOG of a job but thats the only way to do it.
ari666
250,000 hits
- Joined
- Mar 10, 2009
- Messages
- 11,835
- Reaction score
- 128
- Points
- 63
- Location
- melbourne
- Members Ride
- 1966 impala, R32 GTR
soz, didnt notice your post wildss: am using cheap crappy no-name bog. cams fine filler, and protec high fill. the matte black is the uber of uber cheap crap they sell from paintmobile.
the_boozer
no more VK
- Joined
- Nov 7, 2009
- Messages
- 1,510
- Reaction score
- 749
- Points
- 113
- Age
- 51
- Location
- Shitsville Morwell
- Members Ride
- hilux
get your gear from the body shop,
I found them cheaper and have more success with their products,
I found them cheaper and have more success with their products,