Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

whats spark plugs and leads do you use?

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
Any suggestions? i want something decent.. and something i can use for the turbo.. when its installed.

topgun leads any good for rb30?

as for spark plugs..well theres a few to pick from..
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
topgun are fine and NGK plugs
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
sweet! time to get rid of this bosch stuff
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
picked up the box of topguns and the plugs today for 75 dollars not bad :D
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
anyone know if i can put a skyline r31 rb30 coil on my vl rb30?
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
if its running rich the fuel mixture screw is on the afm??? how should i adjust this?? ill keep looking in my book but any help would be great!!
 

detox_nath83

Another VL Driver
Joined
Aug 6, 2005
Messages
2,160
Reaction score
6
Points
0
Age
40
Location
Queensland(Sunny Coast)
Members Ride
VL Turbo Commo
if its running rich the fuel mixture screw is on the afm??? how should i adjust this?? ill keep looking in my book but any help would be great!!

yeah mate u can adjust the screw

if u look at the Leds on the ECU with the engine warm and held at 2000 rpm
they should flash together AFM resistance 375 ohms approx factory setting(probes on pin 1 and 3)............ 3.6V is Factory

1.26V is Lean and 1.32V is Rich while plugged in and rubber boot pulled back to get probes on so keep it between 2.0v - 4.0v
 
Top