Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Wire tracing

V6025

Member
Joined
Mar 26, 2022
Messages
53
Reaction score
29
Points
18
Age
51
Location
Adelaide
Members Ride
Vt
Can anyone help me with no voltage from signal wire on cam sensor 98 5 speed commie?
I have continuity to dfi harness with a beep but i dont know what to do next.
The crank angle wires checkout ok. Voltage to both power and signal wires. But only voltage between B&C Nothing between B&A. Newbie here and also to electricals.
Unsure if you can have a continuity beep, while the wire is still shorting out and this possible short is why i'm not getting 5-7v through signal wire???
I welcome any help, thoughts or wire tracing steps
 

Handy-Andy

New Member
Joined
May 11, 2022
Messages
2
Reaction score
0
Points
1
Location
Western Sydney
Members Ride
VX Executive
Do these help?
 

Attachments

  • VT Ignition Module connections.png
    VT Ignition Module connections.png
    77.8 KB · Views: 70
  • vt-igntion-module-wiring.png
    vt-igntion-module-wiring.png
    1 MB · Views: 71
Top