Worth anything?

[MG's VH Wag]

Hi guys, my mate bought a damaged VR for parts for his car, anyway it has a set of custom made extractors and Y pipe but seeing as he is on red p's he can't put them on his car and gave them to me but i am on red p's too. Would these be worth anything? They look to be 2.5" and the Y looks like it goes into maybe 3".

Cheers!

 

[Ozzie]

If their in useable condition chuck them on eBay and youll get a couple of hundred for them.

First go to your local hardware and get a can of heatproof paint and re-spray them in black or silver to make them more attractive to the buyer.

If their covered in rust then get a wire brush to clean them off.

 

[MG's VH Wag]

They are in pretty good condition with minimal surface rust. I am gonna get the wire brush onto them today then i'll go get some paint and give them a spray. Once i have done this i will see if anyone on here is interested first.

 

[MG's VH Wag]

Here is a pic, i just went over them quickly with the brush and sander i'll do it properly and paint them soon. I also measured them and the outlets on the extractors are 2" but the outlet for the Y pipe is 2.5" so how much would they be worth now lol?

 

[sweefu]

hey mate i've seen extractors in a crappier condition than that go for $250 on ebay so if you hit them with the pressure packs then you should be able to get that easy.

 

[MG's VH Wag]

Ok thats good then. If anyone wants them make me an offer. I'll sand them back properly and paint them before i sell them!

 

[Ozzie]

Ok thats good then. If anyone wants them make me an offer. I'll sand them back properly and paint them before i sell them!

No real point in sanding them back properly.

The paint is going to burn off quickly no matter what.
Just hit them with a wire brush before the heat-proof paint.

 

[MG's VH Wag]

Ok i will just hit them with the brush then the paint