ITEM: VN v6 ECU and BCM (body contgrol module) LOCATION: Melbourne, Victoria SE (near dandenong) CONDITION: WORKING! DELIVERY/PICK UP INFORMATION: WILLING to pick up PAYMENT OPTIONS: willing to pay for the trouble CONTACT DETAILS: email tam_p_Tran@hotmail.com, or PM me here OTHER INFO just need to see if my ECU and BCM(body module control) are stuffed ecu = SILVER BOX IN PASSENGER SIDE bcm = BLACK BOX IN KICK PANEL dRIVERS SIDE so wondering if anyone has a spare and willing to let me borrow will pay for the trouble cheers!
There is no Body Control Module in the VN... Calais included. If for some miraculous reason there is one it will be located around 15cm to the right of the front left hand speaker under the dash...
no bud, its a electric window modual. a body control modual (BCM) is coded to a key head like in the vr-vs onwards the vn-vp dont have this option ok.
not 100% sure, but it could be a central locking modual? or if your car has climit control? ring holden and give them the part number to see what it is if it aint the central locking modual. thats if your car has central locking. it wouldnt be a alarm as they normaly stick the black box under the steering coloum.
yeh, it's probably both central locking and climate control still, doesn't solve me other issues of my dash, so still after one if anyone has a spare
whats the problem your chassing?? if the dash aint working, try swapping the blue plugs around because many who strip dashes misplace the 2 blue plugs with each other.
heres my problem i may have fried the ecu, which is giving me all this weird crap, so i need antoher one to test http://forums.justcommodores.com.au/showthread.php?t=38550
if you have tryed 3 clusters, make sure there all vn-vp, some vr`s may not work as the curcit boards on the back light up different things. as i said, check u have the blue plugs in the right spot also as well as the orange. the wiring loom is straight forward, but make sure earth wires have good ground & everything is pluged in proerly. normaly if u mix the cluster plugs up, it only burns the curcit board out on the back of the cluster.. they are a replacable item or get another vn-vp V6 cluster ive used vr-vs clusters before in vn-vp and they light up different options.. make sure u test all your fuses with a test light and not just look at them, check u have all the right relays in the right places and dont mix a relay with a flasher unit.
thanks for the help snaffler! that's a big help! well, i've followed the numbering on the clsuter, and all the connectors are in the right place, except 1 orange one going in one way, the indicators work, but the immobilsor doesn't, so won't start in the other way, the indicators are all wrong, but the immob. works, so starts really buggs me! i thought that if i fried anything, i could just replace it with another clsuter, but all 3 aren't working when 1 clsuter mess up, so it had to be either 1. loom 2. ecu hence i'm looking for ecu to see if it works or rule out that idea but i'll test the fuses and check the grounds thanks for the help!
and make sure the plugs for the dash arnt upside down ok.. and remember the loom enters into the engine bay also, so check in there too.