H9 Wiring Mod help

[Brettles84]

ok need a lil help here,
ive installed my projectors (wh ii internationals)
done the wiring mod, strip the wh and b-wh wiring on the stalk.
hooked the two up with a piece of wire, soldered and taped up.
now when i use the low beams the high beams are on too.
when the high beams are flicked on in car, in the headlights only low beam is on...
where did i **** this up?


or being a 2000 wh caprice do i even need to do this wiring mod?

 

[Brettles84]

ok played around a little bit more.....
everything is backwards
i turn low beam on and it turns on my high beams.
i turn high beams on and it turns on my high and low beams...
gah,,,?

 

[Brettles84]

anyone please?

 

[wrx884]

just 2 confirm u have genuine WH international headlights goin in yes?

That white wire just needs 2 cut and joined or tapped into the white/black wire and thats it.

 

[Brettles84]

yep genuine lights holden spare parts.
done the wire mod yesterday, but disconnected it because lights werent behaving properly
but now everything is backwards
i turn low beam on and it turns on my high beams.
i turn high beams on and it turns on my high and low beams...

 

[wrx884]

did u cut the white wire so nothing is connecting in pin 2? thats all ya should need 2 do.

 

[Brettles84]

no i just stripped both wires and connected them...
theyre not connected anymore

 

[Brettles84]

thank you heaps wrx884!
working great now!