markER717
Un-Donated Member
- Joined
- Jun 7, 2009
- Messages
- 472
- Reaction score
- 1
- Points
- 0
- Location
- Geelong, Victoria
- Members Ride
- 1990 3.8L VN Calais S1
Okay so I have just got two Blue 12v Footwell Neons and I want to wire them up so they light up both when I open the doors and when I turn my lights on. I have made up two a simple wiring diagrams, one with a switch and one without. I have put the switch on the negative side of the circuit because I didn't want to over crowd the positive side. Would this work with the splice in the pos. wire and just leading them off in different directions? also if both are activated at the same time this wont provide too much power to the circuit and damage the neon or something else?
No Switch
Switch
Also what wires on VN Calais would receive signal from the door switch and what colour would the pos. be? Also where else could i get power to turn on the lights when the headlights go on other than the cigarette lighter as i already have my rear 12v power outlet piggy backed off that harness.
No Switch
Switch
Also what wires on VN Calais would receive signal from the door switch and what colour would the pos. be? Also where else could i get power to turn on the lights when the headlights go on other than the cigarette lighter as i already have my rear 12v power outlet piggy backed off that harness.