202 Holden Air Leak Issue

[EYY]

It's hard to bend valves in stock 202.s I've had the gears strip at idle and at high rpm never bent a valve.burnt valves on the other hand been there done that lol.Carby will be the issue I just converted one with a small cam from varajet to efi all the no idling and no downlow power was instantly fixed quadrajet was the cause no amount of messing withthe carb would make it run nice

That must be why I don't seem to have any trouble. I didn't even bother with a carby with mine, I just put the injection manifold straight on and it always ran well. Until I broke it...

 

[MONARQ]

UP DATE:
Firstly thank you to everyone that provided feedback! Great website!

I Have finally fixed my VH Holden (after 4 months!!!).
It was found to be the carburettor..... due to the time it took me to replace the cam shaft (approx. 4-5 weeks), something when wrong within the Varajet II Carb.
Most likely bad fuel or block jets....
After every dialogistic issue tried, I installed a 34ADM Webber. This still gave me running issues, but after re-kitting the carb, it now runs like a rocket.

Thank you to everyone, i'll be back next time it breaks down