After Market Ecu On Efi Vk 202

[vkberlina]

Hi Everyone,

Just wondering if anyone has fitted an after market ECU to a EFI 202?

Im currently building a new motor
Block bored 40thou
Running ACL Flat top Racing Pistons
Compression Ratio of 9.9:1
Custom ground CAM Specs
IN 34/66 EX 70/30 280degdur 112deg lobe centre
231 dur @ .05" .480" Lift. Lobe separation of 112 expected power range 3200-6500 RPM
Heavily ported head with large valves,
Valve springs with 250lbs of pressure @ .5lift
+.100" 7deg Valve Retainers & Collets
Street Terra Roller rockers
Complete Bottom End balance & Blueprint.
High flow fuel injectors

cheers
Scott

 

[208_Fireball]

I'm in the process of fitting the kalmaker real-time version of the vn-vp delco computer to my 202 (which currently uses vk efi.)

My cam & compression are milder than yours (~9.4:1 and 217 deg duration at 50 thou), so it wouldn't be quite as good a comparison, but definitely will let you know of the results.

Cheers,

Dave