EYY
Well-Known Member
- Joined
- Mar 6, 2011
- Messages
- 5,756
- Reaction score
- 2,039
- Points
- 113
- Location
- Vic
- Members Ride
- VS Statesman
As the title suggests, just wondering if anybody has had a go at fitting their own semi floating pistons?
I need to remove the rod from a brand new piston without damaging it. I'm thinking about making a jig that supports the small end of the rod in the shape of a u that will allow the pin to be pressed out of the rod without putting pressure on the piston itself.
If anybody has any other ideas or methods that I could use to remove the piston from the rod without damage I'd be more than happy to hear about it
I need to remove the rod from a brand new piston without damaging it. I'm thinking about making a jig that supports the small end of the rod in the shape of a u that will allow the pin to be pressed out of the rod without putting pressure on the piston itself.
If anybody has any other ideas or methods that I could use to remove the piston from the rod without damage I'd be more than happy to hear about it