Black GXP Maloo

[McFly The Slacker]

Fitted tyres onto my 10.5 fronts. They're Ferrada FR1s with 255s with a lot of stretch. Doesn't seem to scrub any worse than the RFs do, a lot less Mexican than I was worried they'd be as well. Less low and pumping the guards a bit should solve that though.

 

[McFly The Slacker]

Finally have all the tyres and wheels fitted up. 20x10.5 fronts and 20x11.5 rears. A lot of poke on the rears. Was going to basically widebody it but I'm going to put that off for the immediate future. Been spending all my money on the ute lately and want to put another 10k away for a house before I spend anymore money on the ute. Will roll around like this from time to time and swap between them and a set of Pentagons I just need to buy another rear wheel for.

Big thanks to the guys at Racing Ready Motorsport.

More immediate issue I have is the rear center caps not fitting due to fouling on the axle.

 

[McFly The Slacker]

New look for the Maloo. Scrubbing all the time got old fast. So I've got a set of Hussla Zane 20x10 all round on it now, and have my Nitto Invo's on them. Took it for a couple of good drives this weekend and it was great to just be able to drive it without wincing at every bump. Mexi-flush is fun in its own way, but drive-ability goes down a lot.

Also bought a splitter and side extensions off E-Wing Aero. Looks great in my opinion. Probably not to everyone's taste though. Only issue is because of the angle of the E2 front bar the splitter doesn't sit flat, I do have some splitter bars though, but if I drill into the face of the front bar there's no going back.

And yes, I need to stop changing wheels every few months.

 

[McFly The Slacker]

Had a head and cam package installed. 233/238 cam, ported heads, 3500 stally, and all the other bells and whistles. 468rwhp and 923nm torque.

 

[Manticore]

Had a head and cam package installed. 233/238 cam, ported heads, 3500 stally, and all the other bells and whistles. 468rwhp and 923nm torque.

I have the same cam, awsome sound and power, but i struggle with it i have a manual and gees i have to drive it hard.

 

[McFly The Slacker]

I have the same cam, awsome sound and power, but i struggle with it i have a manual and gees i have to drive it hard.

Yeah I could see that being the case in a manual. Its a pretty aggressive cam.