Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
208_Fireball said:Blue Dizzy on a Black Motor
3) For wiring the power for the dizzy, The EST system switches the 12V- side of the coil, and the 12V+ side of the coil is connected to ignition - the pink power wire is on the same circuit as the choke, and idle shutoff solenoid. The VH HEI module will have a green wire to switch the negative side of the coil.[/COLOR]
All you do is pull out the EST dizzy, and drop in a blue HEI dizzy. The pink wire stays connected to the + side of the coil, and the 2 wires from the HEI one hook onto the coil too. It's as easy as that. There is a brown wire in the VK that hooks onto the coil neg terminal for the tacho.
208_Fireball said:Hi Rod,
The light brown wire (maybe is just crusty pink?) should go to the positive side of the coil, and the green should go to the negative.
If in doubt, the gregory manual for the VC/VH shows the actual pins of the electronic module, you should be able to trace from there
Cheers,
Dave