Cant get into gear

[Peter Hills]

Got an issue..l have a 04 maloo..LS2 ..manual..l got work done on gearbox..cluch pressure plate 6months ago...lastweek..l was at the lights..car running..it wouldnt go into any gears..bugger..but went into gears only when cat was off..great ..l was able to limp around the corner and park up...what is this issue and will it be major...l put it on a tow truck and got it delivered to the gearbox shop that did the work...l dont want them sticking me with a big bill...

 

[Immortality]

I'd start with bleeding the clutch.

 

[BlackVXGTS]

I'd start with bleeding the clutch.

First step would be to see if there is any clutch fluid left in the reservoir - could have leaked out if the bleed nipple wasn't fastened correctly.

 

[Peter Hills]

First step would be to see if there is any clutch fluid left in the reservoir - could have leaked out if the bleed nipple wasn't fastened correctly.

Thanks for yr reply

 

[Peter Hills]

I'd start with bleeding the clutch.

Thanks for replying