Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Changing ve v6 fuel pump unit

07GTS

Well-Known Member
Joined
Sep 8, 2013
Messages
5,006
Reaction score
6,689
Points
113
Location
Australia
Members Ride
VEGTS BUILT BLOWN E85
yea the whole module does everything, i done just pump in mine because i needed a higher flow...
 

kizza50

Member
Joined
Oct 10, 2009
Messages
621
Reaction score
7
Points
18
Members Ride
VX acclaim S2
Ok I'm replacing the whole unit hopefully takes me no longer then 30-40 minutes cheers for your help I'll update how I go
 

kizza50

Member
Joined
Oct 10, 2009
Messages
621
Reaction score
7
Points
18
Members Ride
VX acclaim S2
So I did it all pretty easy, problem still persists however, pretty annoyed but that's life I guess, anyone else have any idea what it could be???
 

Michael-08-VE

New Member
Joined
Dec 6, 2012
Messages
475
Reaction score
4
Points
0
Age
30
Location
Maryborough QLD
Members Ride
Ve commodore
I have the same problem, but mine is really bad when I fuel up, Evap solenoid maybe? And no matter hot or cold it vibrates the car, engine mount. -.- the list is big.
 

ScottNZ81

New Member
Joined
Jan 31, 2018
Messages
5
Reaction score
0
Points
1
Age
42
Location
Auckland NZ
Members Ride
2008 VE Sportwagon 3.6L LY7 6G1
Would be keen to hear what you found as the solution, mine is doing something similar except no clues on the diagnostic.
 

Kingcarl

Active Member
Joined
Oct 28, 2017
Messages
179
Reaction score
48
Points
28
Location
Victoria
Members Ride
VE Sv6 series II MY 12.5
I had the same problem ended up being the purge valve solenoid. If it is that easy fix, cheap part
 

HarryHoudini

Active Member
Joined
Jan 7, 2013
Messages
570
Reaction score
144
Points
43
Location
Australia
Members Ride
1991 VN Wagon..2012 VE Sportwagon.
have a look under the rear seat and if there is a circle of sealant on the drivers side then u have a inspection hole that u can get to the pump from, if u dont have that then u will need to drop the tank...

Hi..does this also apply to the Sportswagon as well?,helping neighbour this w/end and don't wish to start pulling seats out if we have to drop tank......TIA.
 

07GTS

Well-Known Member
Joined
Sep 8, 2013
Messages
5,006
Reaction score
6,689
Points
113
Location
Australia
Members Ride
VEGTS BUILT BLOWN E85
havnt seen any wagons yet but the seat is easy to pull up it will unclip and u can then see if its a big job or not
 

HarryHoudini

Active Member
Joined
Jan 7, 2013
Messages
570
Reaction score
144
Points
43
Location
Australia
Members Ride
1991 VN Wagon..2012 VE Sportwagon.
Ok,Thanks for reply,will have a look.
 

kungfumike

New Member
Joined
Mar 26, 2013
Messages
22
Reaction score
0
Points
1
Location
Sydney
Members Ride
VE Calais 3.6 SIDI
or just cut a hole and fit one of these...
Resized_20170207_201014_001.jpeg

https://g8only.com/product/g8only-fuel-pump-access-panel/
 
Top