Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

F l a k's '94 VR Exec

F l a k

Member
Joined
Feb 25, 2010
Messages
479
Reaction score
3
Points
18
Age
32
Location
Wagga Wagga, NSW
Members Ride
'94 VR Exec
Update:
After a couple of day's at Wagga Wheel Alignment Centre it turns out that the problem was both the shocks were faulty. They were swapped out for new items, and I also had a wheel alignment done, as well as a couple of my mistakes fixed; I had the washers back to front on the passenger sway bar link and z bar lol :doh:, and didn't tighten a few things quite as mush as I should have but not so little it was a major concern really, as well as having the steering rack adjusted, the diff checked and the transmission serviced.

No noises now, it's all fixed and up to date with its services. Money well spent :)
And if you're nearby, I recommend these guys, they were helpful as.
 

MR_JORDZ

Situation
Joined
Apr 24, 2010
Messages
25
Reaction score
0
Points
0
Age
37
Location
$outhside logan,Queensland
Members Ride
94 csi lexcen VR v6,
got the wheel part right,throw sum dark tints and a set of lowered spring's,and she will be a really nice looking ride
 

F l a k

Member
Joined
Feb 25, 2010
Messages
479
Reaction score
3
Points
18
Age
32
Location
Wagga Wagga, NSW
Members Ride
'94 VR Exec
Thanks man, yeah it's tinted already but I'm going to go darker later on, and it is lowered. I agree it will probably look better a bit lower, but it handles really well for what I want at the moment, and any lower and I won't be able to navigate my driveway or tow anything (have a box trailer and a ski-boat project). But yeah, thanks :)
 

F l a k

Member
Joined
Feb 25, 2010
Messages
479
Reaction score
3
Points
18
Age
32
Location
Wagga Wagga, NSW
Members Ride
'94 VR Exec
Update:
Yesterday I got a new stereo installed by Wagga Car Radio and Hi Fi. Took them about a day all up.
Focal 165A-1's in the front, with the tweeters up in the dash where they are on higher models from factory, but as mines an Exec. the dash had slots cut out, but you cant tell, it's done really well. Focal 165CA-1's in the rear, under the factory covers, which is why I went 6" not 6x9". The head unit is an Alpine CDE-102Ei, with an iPod cable from behind into the glove box. I also had all the wiring replaced and all the joins covered with heat shrink, and a rocker switch added to the boot, in front of the light to turn it on and off. And I bought my first iPod just for this lol, a black 160GB Classic. All up I'm happy with the work and it sounds really good.

Head unit - Alpine CDE-102Ei:
$329 (AUS)
CD/MP3/WMA/AAC Receiver

cde_102.png


Front Speakers - Focal 165A-1:
$329 (AUS)
6.5" component speaker set
Maximum power 120W
Nominal power 60W
Sensitivity (2.83 V/1m) 92dB
Frequency response (+/-3dB) 60Hz - 20kHz
Nom. impedance 4 ohms
Tweeter TN44 Aluminum inverted dome
Mounting depth 66mm

access_165a1.jpg


Rear Speakers - Focal 165CA-1:
$219 (AUS)
6.5" co-axial loudspeaker set
Maximum power 120W
Nominal power 60W
Sensitivity (2.83 V/1m) 92dB
Frequency response (+/-3dB) 60Hz - 20kHz
Nom. impedance 4 ohms
Tweeter Aluminum inverted dome
Mounting depth 66mm

access_165ca1.jpg
 
Last edited:

F l a k

Member
Joined
Feb 25, 2010
Messages
479
Reaction score
3
Points
18
Age
32
Location
Wagga Wagga, NSW
Members Ride
'94 VR Exec
Update:
Fitted new boot and bonnet struts today, Monroe Max-Lifts.
Also took some pics :)

Dash looking sexy (but smelling like sunscreen)
IMG_2060.jpg


Tweeters
IMG_2051.jpg


Head Unit
IMG_2052.jpg


Boot light switch
IMG_2049.jpg


A new bonnet strut
IMG_2047.jpg


Engine bay pic
IMG_2046.jpg
 

EDGE3

New Member
Joined
Feb 20, 2011
Messages
532
Reaction score
2
Points
0
Location
NEWCASTLE
Members Ride
1997 VS COMMODORE,1996 GTS-R COMMODORE
Yes they did cost that much my vs i bought brand new in 1996 cost me $26000
 
Top