308vkcalais
DIO..
- Joined
- Nov 18, 2005
- Messages
- 216
- Reaction score
- 2
- Points
- 18
- Members Ride
- 308 VK Calais, VK EFI Berlina, V6 VN & Kenworth...
Tired of taking suspension arms to Pedders & the local garage to have bushes pushed out I knocked this up.Now i realise it ain't exactly a thing of beauty but it works a treat.Works on all suspension arm bushes including the diff bushes for which i originaly made it but the added bonus is it fits all.I chopped a 50mm piece of steel pipe off her gate post, she weren't real happy about.The diamater of the pipe is 53mm.I welded a plate on 1 end & drilled an 11mm hole in.Then i used a 160mmx11mm bolt, sum large flat steel washers, i used sum washers from an old VK old Raduis Rod.Put it on 1 side of the bush, the side which is tapered, start winding the nut & the bush extrudes out inside the pipe.Works every time.Hope it may help sumbody else as it saves lots of time & $$.For the 15mins it took me to knock it up it's already payed for itself...