Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Also don't believe you need to go 0 gauge if you get told that. Way over board for what you want to do. Glad we can help :beer chug:
Won't matter with the ground. It's still metal on metal. Also if you can get the 0 gauge and 0 gauge to 4 gauge distro then you might as well.
oh ok sweet as i was just reading one day this hot to install 2 amp thing and the guy was saying something bout making sure yu put them the right way round..
yer well if i can get the 2gauge i will but if not ill go the 0 gauge jus checkin if it wud be more reccomended to go with 2 or jus run with 0 but yer thnks
didnt want to make a new thread for something as small as what im about to ask so hopefully some1 reads it lol
im looking at getting some computer fans to put facing onto my amps 2 keep them cool in the boot most probably these ones PC/MAC QUIET COMPUTER SYSTEM COOLING CASE FAN 80MM FANS - eBay Case Fans, Fans, Heatsinks, Cooling, Components, Computers. (end time 25-Mar-10 02:13:40 AEDST)
just because there the cheapest and give me the best details and description on the wiring and such.. if i bought these and jus put the red 12v power wires to the remote wire from the amps and the black ground wire to the ground on the amp wud it run well do you think?
didnt want to make a new thread for something as small as what im about to ask so hopefully some1 reads it lol
im looking at getting some computer fans to put facing onto my amps 2 keep them cool in the boot most probably these ones PC/MAC QUIET COMPUTER SYSTEM COOLING CASE FAN 80MM FANS - eBay Case Fans, Fans, Heatsinks, Cooling, Components, Computers. (end time 25-Mar-10 02:13:40 AEDST)
just because there the cheapest and give me the best details and description on the wiring and such.. if i bought these and jus put the red 12v power wires to the remote wire from the amps and the black ground wire to the ground on the amp wud it run well do you think?
I would be cautious of loading up the 'REM' wire with fans and such, as mentioned it can only supply a very low current, (only a few hundred mA i beleive) and with the fans drawing approx ~ 0.17A each, you run the risk of overloading it.
However you can install a relay and use the 'REM' wire to trigger it, like so:
0 gauge is huge but so if you can get it through your firewall then at least you know you won't have to worry about exceeding the power cables limits.