indicator stalk problems

[Schwuppes]

Hi all,

there seems to be some sort of dodgey contact on my indicator... when i indicate left i have to use my finger to push the stalk inward slightly for it to work, its pretty annoying.
Was just wondering if I can fix this myself, just spray a little contact cleaner inside, or replace the stalk? But ive heard that its dangerous to fiddle around in that area as the commodore's airbag is easily set off accidentally.

is it expensive to get this repaired? Car is a VTII 2000 V6

cheers

 

[accentstencil]

Contact cleaner might fix the problem. Disconnect the battery beforehand to eliminate any airbag issues.

 

[edals]

Just replace the stalk mate can get one for about 40$ just disconnect the battery and will be no probs, I pulled my old stalk apart and little springs went everywhere lol

 

[Schwuppes]

cheers guys

so is this a common issue with commodores? Just have to replace the stalk?

how much would it cost to get it fixed by a auto electrician... in case replacing the stalk doesnt help.

 

[d.k.vmatt]

well how you describe the issue it should just be the stalk so replacing it shold fix the problem but there is only one way to find out

 

[Schwuppes]

yeah, I just checked the hazard lights and all indicator flash properly, I'll pick up a new stalk and see how it goes. Cheers

 

[pablo]

There is a detailed description on how to replace those indicator arms some where here, do a search. From memory, there is only one screw to remove, the rest just clips in place. Takes about 15 - 20 minutes to do.

 

[Schwuppes]

cheers mate

are the indicator stalks the same for the Series I and Series II VTs? Doesnt matter which one I buy?

 

[d.k.vmatt]

for a vt you need a vt or series 1 vx. the vx 2 and up are different style and wiring