Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

interior light has "ford" cast into it

14secvp

New Member
Joined
Aug 30, 2006
Messages
667
Reaction score
12
Points
0
Location
south island newzealand
Members Ride
vp v6 commodore executive
took the interior light cover off my vp today and noticed it had ford and then a part number cast into the plastic what gives I thought I bought a holden not a P.O.S.anyone else noticed this.
 

JD

Donating Member
Joined
Aug 18, 2006
Messages
1,716
Reaction score
26
Points
48
Age
37
Location
Deep South, SA
Website
www.ccgm.au.tt
Members Ride
1.6L Turbo Holden Croooooooooooze
i think a couple of fords had a similar interior light as holdens, anyone able to confirm that because some look very similar in apperance
 

jacko

New Member
Joined
Jan 24, 2004
Messages
156
Reaction score
2
Points
0
took the interior light cover off my vp today and noticed it had ford and then a part number cast into the plastic what gives I thought I bought a holden not a P.O.S.anyone else noticed this.
haha are you serious? it's a light cover, who cares?
 

STEALTHY™

So Wet For You!
Joined
Jan 3, 2005
Messages
6,630
Reaction score
83
Points
48
Location
SA - The Roadworks State
Members Ride
VP Calais International, FPV, Audi
Most parts are generic now-a-days.


Theres alot more than just the interior light the same (can't remember off the top of my head, but i know that a 6cyl falcon gearbox is the same T5 as VN/VP 5Ls)
 

14secvp

New Member
Joined
Aug 30, 2006
Messages
667
Reaction score
12
Points
0
Location
south island newzealand
Members Ride
vp v6 commodore executive
yeah diffs and stuff made by borgwarner thats all good shared between the two.it was the light holder not the cover.and it had ford on it not some other susiduary company like the gearboxs and diffs and stuff but FORD.ewww yuk.
the enemy.

just thought it was weird expected to see holden written in there thats all.

anyone else found any other parts on there holden that have ford on them.
 

LowVp

VP Enthusiast
Joined
Aug 30, 2005
Messages
460
Reaction score
2
Points
0
Age
44
Location
Dalby, Qld
Members Ride
VP Ute 3.8T T56
yeah the interior light in the vn and vp does ford stamped into it, noticed this a few years back
 

Holden2gether

The short,chunky fella
Joined
Oct 13, 2006
Messages
55
Reaction score
1
Points
0
Location
Christchurch,New Zealand
Members Ride
VY S
i think a couple of fords had a similar interior light as holdens, anyone able to confirm that because some look very similar in apperance

Sounds like what's happened here if that's the case.I'd say a previous owner has had to replace the cover at some stage and has the Ford one laying around in the garage,thought it looked similar and found it fit ok so clipped it on.Some people just don't care about brand loyalty :bang:
Whoops,didn't read LowVP' s post above!! that'll explain it...common supplier.
 

Reaper

Tells it like it is.
Joined
Aug 15, 2004
Messages
6,494
Reaction score
11,583
Points
113
Location
SE Suburbs, Melbourne
Members Ride
RG Z71 Colorado, 120 Prado , VDJ200, Vantage
took the interior light cover off my vp today and noticed it had ford and then a part number cast into the plastic what gives I thought I bought a holden not a P.O.S.anyone else noticed this.

From memory the rear seat fold down tray bit on VT-Z are exactly the same as that used in an XF Falcon. Get used to it - we are all driving Fords in drag :whistling

Reaper
 

88GreenVN

Next Exit Left
Joined
Jun 12, 2006
Messages
6,795
Reaction score
136
Points
63
Age
60
Location
Surprise, Arizona
Members Ride
Dodge Ram Van 1500 5.2 V8
Not all of the VN Calais light covers have FORD in them - just some.
 
Top