L98 Conversion into VX

[Bigfella237]

Why spend $7-10k and end up with a second-hand L98 that's probably done 100,000km? That's a lot of money for an extra 300cc capacity!

If you threw that same $10k at your current LS1 you'd have a brand new engine that would **** all over a standard L98 (and most likely a standard LS3 as well).

Andrew

 

[Kyemasclet]

Okay do any of you know if this is possible. Not for street use but i have the idea of putting my l98 into a sv6, now i have no plan at all of changing diffs or tail shaft, really i want to change as little as i can. so my question is will the l98 bolt to the v6 box, im not worried about braking or twisting it is just doing burnouts. Useful info would be very grateful

 

[Darcon666]

.......so my question is will the l98 bolt to the v6 box.....

Good thread dig.... Answer is No, you will need to get a bell housing and/or adaptor made.

 

[Kyemasclet]

Good thread dig.... Answer is No, you will need to get a bell housing and/or adaptor made.

So with customizations could be done.. being in the long run better off with a box that belongs to the motor?

 

[_R_J_K_]

better off with a box that belongs to the motor?

Correcto.

Think both boxes have a different length input shaft anyway.