Manifold PCV plastic barbs

[Kudrow]

Hi,

Does anyone know where I can source the plastic barbs that push into the manifold for the PCV hoses? Or even a GM part number?

Sample from eBay shown in attachments.

My driver side has snapped off and left most of it inside the manifold. Assuming I'll need to remove the manifold and try and push it back out from the inside?

Cheers.

 

[Kudrow]

Followed this one: https://forums.justcommodores.com.au/threads/ve-vz-manifold-vacuum-ports.275815/

Worked well. Cut them in and used some Inox in the process so I didn't feel as guilty. Then backed them out to remove the alum filings/swarf and back in again.

 

[Shen Long]

Hi,

Does anyone know where I can source the plastic barbs that push into the manifold for the PCV hoses? Or even a GM part number?

Sample from eBay shown in attachments.

My driver side has snapped off and left most of it inside the manifold. Assuming I'll need to remove the manifold and try and push it back out from the inside?

Cheers.

replace them with brass screw in type... they will never break again.