grim596
New Member
- Joined
- Nov 7, 2008
- Messages
- 55
- Reaction score
- 0
- Points
- 0
- Location
- Bonnells Bay NSW
- Members Ride
- 2010 3.0L TDi Colorado
Okay, got a new V6 Buick engine like 6 months ago and the it went fine for a good long while nothing went wrong with the actual engine
On thursday morning i degreased and sprayed the engine down (didn't drive)
Friday morning i had to leave newcastle to get to wollongong, so i left drove about 10kms and noticed the oil light on, pulled over turned out to be the filter wasn't on properly...
all good til i got to Bulli Pass, at the bottom it felt like she was losing power under load, not misfiring, pulled over and had a look, the pressure switch was pouring out oil, no warning light was on (???), so i got a new switch and some oil, all was good til the next morning and now it misfires under load
my question is what is a likely scenario that would cause each of those problems?
On thursday morning i degreased and sprayed the engine down (didn't drive)
Friday morning i had to leave newcastle to get to wollongong, so i left drove about 10kms and noticed the oil light on, pulled over turned out to be the filter wasn't on properly...
all good til i got to Bulli Pass, at the bottom it felt like she was losing power under load, not misfiring, pulled over and had a look, the pressure switch was pouring out oil, no warning light was on (???), so i got a new switch and some oil, all was good til the next morning and now it misfires under load
my question is what is a likely scenario that would cause each of those problems?