Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

My HSV Clubsport

vr304

Well-Known Member
Joined
Feb 9, 2013
Messages
2,841
Reaction score
1,651
Points
113
Location
Auckland, New Zealand
Members Ride
2007 ssv manual
Yeah got me quad lock on the bike. Car just connects to phone via Bluetooth so once in the car I just throw phone on the passenger seat.

Petrol prices today....

View attachment 266587
Man if only our fuel prices in NZ looked like that, well over $3 a litre at a lot of places:oops:
 

HSV-Paul

Well-Known Member
Joined
Dec 2, 2022
Messages
979
Reaction score
2,650
Points
93
Age
53
Location
Logan QLD
Members Ride
HSV Clubsport R8
So here we go... the strip down to flex plate begins. Funny how a lot of 'how to' vids don't say to remove the exhaust, or at least the part bang in the middle!!!... :D

Anyway, these are off regardless of if needed to be off. Need a bloody good clean too... :oops:

20240413_112547.jpg
 

HSV-Paul

Well-Known Member
Joined
Dec 2, 2022
Messages
979
Reaction score
2,650
Points
93
Age
53
Location
Logan QLD
Members Ride
HSV Clubsport R8
u may have to tilt the engine to get the box off, if u havnt already good to take the intake off so it dosnt snag if ur OTR
Thanks for the heads up. OTR is off.

So got the rest off. Pretty sure X-Force are rubbish but anyways...

Screenshot_20240413_130255_Gallery.jpg
Screenshot_20240413_130323_Gallery.jpg


This was challenging getting to the third bolt, but we got there...

Screenshot_20240413_130149_Gallery.jpg



Have skimmed through 'how to' vids but most are for yank cars so have no relevance so far..

Coffee break then will get stuck back into it...
 

losh1971

Well-Known Member
Joined
Jan 17, 2010
Messages
22,759
Reaction score
22,669
Points
113
Location
North Tas
Members Ride
VE Series I SS Ute
Thanks for the heads up. OTR is off.

So got the rest off. Pretty sure X-Force are rubbish but anyways...

View attachment 266640View attachment 266641

This was challenging getting to the third bolt, but we got there...

View attachment 266642


Have skimmed through 'how to' vids but most are for yank cars so have no relevance so far..

Coffee break then will get stuck back into it...
Someone has gone a bit fast over a speed bump. Unless it was too low at some point.
 

losh1971

Well-Known Member
Joined
Jan 17, 2010
Messages
22,759
Reaction score
22,669
Points
113
Location
North Tas
Members Ride
VE Series I SS Ute
Do you have an engine support bar? That will make it a lot easier to angle the engine when the trans slides out.
 

HSV-Paul

Well-Known Member
Joined
Dec 2, 2022
Messages
979
Reaction score
2,650
Points
93
Age
53
Location
Logan QLD
Members Ride
HSV Clubsport R8
Do you have an engine support bar? That will make it a lot easier to angle the engine when the trans slides out.
I have a few jacks lol

Wondering can I lower the transmission on a jack while still attached to the engine.

God only knows how I undo this if not...
20240413_135945.jpg
 
Top