Gse
Active Member
- Joined
- Jan 14, 2006
- Messages
- 169
- Reaction score
- 29
- Points
- 28
- Age
- 42
- Members Ride
- Opel Monza
I place a VDO 0-5bar sensor in my 304 engine and i hooked up a cluster from a wrecked Opel Monza with some wires to the engine that lies on the floor just to see its RPM Watertemp and oilpressure..
My 304 has 3 bars/45psi oilpressure wenn cold at idle the oil is 20w50...
Havent checked it the oil pressure wenn hot cause i had no time to get it warm.
Is that enough 45psi wenn cold????
What is good and what is bad for Holden V8 in terms of PSI?
My 304 has 3 bars/45psi oilpressure wenn cold at idle the oil is 20w50...
Havent checked it the oil pressure wenn hot cause i had no time to get it warm.
Is that enough 45psi wenn cold????
What is good and what is bad for Holden V8 in terms of PSI?