DUK13Y
When in doubt, slide it out
- Joined
- Nov 4, 2007
- Messages
- 793
- Reaction score
- 6
- Points
- 18
- Location
- Sydney, Australia
- Website
- www.facebook.com
- Members Ride
- VEII SSV, VYII Berlina, '97 Lancer
Hey guys,
Just received my new PCM tune and 1.9 roller rockers w/push rods for my VYII ecotec.
Will install tomorrow but was wanting to get some rough idea on an install process for each. MACE's site doesn't feature install instructions for these parts so I was wanting to know if anyone has done a write-up in the past?
A quick search found nothing elaborate, just something to do with installing the push rods with correct orientation?
And how to correctly torque the rockers once in place? Can I just torque to spec as is or do I have to torque when rocker is closed/open?
I've heard they can rattle if not torqued correctly.
Install looks easy enough but a guide to follow would be appreciated.
As far as the PCM goes, simple plug and play, but where is it? Is it behind the left hand kick panel in the footwell?
Cheers
Just received my new PCM tune and 1.9 roller rockers w/push rods for my VYII ecotec.
Will install tomorrow but was wanting to get some rough idea on an install process for each. MACE's site doesn't feature install instructions for these parts so I was wanting to know if anyone has done a write-up in the past?
A quick search found nothing elaborate, just something to do with installing the push rods with correct orientation?
And how to correctly torque the rockers once in place? Can I just torque to spec as is or do I have to torque when rocker is closed/open?
I've heard they can rattle if not torqued correctly.
Install looks easy enough but a guide to follow would be appreciated.
As far as the PCM goes, simple plug and play, but where is it? Is it behind the left hand kick panel in the footwell?
Cheers