Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Question about a wheel speed sensor on VX Berlina LS1?

Brett_jjj

Well-Known Member
Joined
Oct 16, 2009
Messages
6,805
Reaction score
108
Points
48
Location
Tamworth NSW
Members Ride
vs commodore
Only one I could find on ebay was this one.

COMMODORE / CALAIS VR to VT ABS BRAKE WHEEL SENSOR. NEW GEN.HOLDEN | eBay

I thought I had a copy of the ABS/ETC error codes on my desktop somewhere, and I just found them,

Heres a list of ABS/ETC error codes for VT to VY, but these codes can only be flashed up by bridging the terminals 5 and 12 in the diagnostic connector on VT and VX models, for other models, you will need a suitable scantool to read these codes.

Code 12= Start up code/ system ok.
Code 21= Front right wheel speed sensor faulty signal.
Code 23= Front right wheel speed sensor short or open circuit.
Code 25= Front left wheel speed sensor faulty signal.
Code 27= Front left wheel speed sensor short or open circuit.
Code 28= Front wheel speed sensor frequency incorrect.
Code 31= Rear right wheel speed sensor faulty signal.
Code 33= Rear right wheel speed sensor short or open circuit.
Code 35= Rear left wheel speed sensor faulty signal.
Code 37= Rear left wheel speed sensor short or open circuit.
Code 41= Front right inlet valve solenoid.
Code 42= Front right outlet valve solenoid.
Code 45= Front left inlet valve solenoid.
Code 46= Front left outlet valve solenoid.
Code 47= Priming valve solenoid.
Code 48= Switching valve solenoid.
Code 51= Rear right inlet valve solenoid.
Code 52= Rear right outlet valve solenoid.
Code 55= Rear axle inlet valve solenoid/Rear left inlet valve solenoid.
Code 56= Rear Rear axle outlet valve solenoid/Rear left outlet valve solenoid.
Code 61= Pump motor or relay faulty.
Code 62= RPM signal incorrect.
Code 63= Valve solenoid relay circuit faulty.
Code 67= Stop light switch circuit faulty.
Code 71= Control module internal fault.
Code 72= Data fault.
Code 73= Requested torque circuit fault.
Code 74= Actual torque circuit fault.
Code 78= Incorrect optional coding.
Code 85= Voltage too low.

Code 58 for gen 111= Throttle relaxer PWM interface fault.
Code 62 for gen 111= RPM signal fault.
Code 64 for gen 111= Throttle relaxer control module position fault.
Code 65 for gen 111= Throttle relaxer motor fault.
Code 66 for gen 111= Throttle relaxer control fault.
 

scrano

Member
Joined
Feb 2, 2009
Messages
270
Reaction score
0
Points
16
Location
Shepparton
Members Ride
VX Berlina LS1
Thanks for posting those fault codes, because that's a fair bit more detailed than what I had. That link that you posted from eBay, is the only one that I could find too, which had me thinking that they might actually have different name for some stupid reason (even though it's the same thing)

I wasn't sure about that eBay listing when I came across it, because it says that it's everything through to VT, so I didn't know whether there was a design change for the VX at all???
 
Top