Removing peeling clear coat

[Farqhed]

Hi, this has probably been covered before but i don't have time to do a search(busy busy..)

I have just bought a white VT and the clear coat on the passenger door is half peeled off.

How do i nicely remove the rest of it? Doesnt have to look perfect but id like it to be less visible (stands out like dogs balls)

thanks in advance for any help

 

[DAKSTER]

buy a similar door and replace it.

 

[vhgasser]

respray dont know why they clear white for anyway it will eventually start to yellow

 

[Customcreations]

How capable are you with panel work and painting.
If you trying to do it without cost and have the time and are carefull enough. U can use a razor blade. to carefully scrape the clear layer off.
Or give it a cut and polish to diguise the removing clear edges.

 

[DAKSTER]

How many white vts are there in australia? Pick up a decent door cheap as chips, if the trim doesnt match, just change it over, colour matching not much of a problem with white, all good.

Or respray.

 

[MikeCuzzy]

I've seen them as cheap as $50 for a door mate, as above, just pick up a spare.

 

[Farqhed]

I guess i'll give it a go with the cut and polish when i do the rest of the car.

Will probably end up picking up another door and bonnet. bonnet is covered in stone chips.

thanks blokes