NAY73N
New Member
- Joined
- Mar 24, 2009
- Messages
- 38
- Reaction score
- 0
- Points
- 0
- Location
- South Western Sydney
- Members Ride
- VX Series II S Pak
Hey all,
before I get flamed on doing not doing a search, i have done one and found 2 half useful posts. I drive a VX Commodore and im looking at installing a Air/Fuel Gauge in it, its got 3 wires and ill be taking a punt but id say RED is + Black is - and the gray wire is for the O2 Sens.
My question is where is the best place to splice into it? I was thinking the splice into the wire that goes to the ECU if thats possible, there is bugger all instructions with the gauge even done a google search and came up empty apart for a few older model commodore posts where ppl said splice into the purple wire.
If someone cause point me in the right direction that would be great.
before I get flamed on doing not doing a search, i have done one and found 2 half useful posts. I drive a VX Commodore and im looking at installing a Air/Fuel Gauge in it, its got 3 wires and ill be taking a punt but id say RED is + Black is - and the gray wire is for the O2 Sens.
My question is where is the best place to splice into it? I was thinking the splice into the wire that goes to the ECU if thats possible, there is bugger all instructions with the gauge even done a google search and came up empty apart for a few older model commodore posts where ppl said splice into the purple wire.
If someone cause point me in the right direction that would be great.