trav27
Member
- Joined
- Aug 24, 2008
- Messages
- 114
- Reaction score
- 0
- Points
- 16
- Location
- Blacktown , NSW
- Members Ride
- Vt Commodore
Hey all, I've recently picked up a vy ss M6. Just got a couple of questions as I'm not sure whether this is normal or not.
1. When trying to change gear at a higher rpm, the rev needle comes down from about 4.5-5ish K rpm down to 0. Is that normal? As far as I know the car hasn't been tuned.
2. When the revs go past 4k or so, the traction control turns off by itself.
Hasn't caused me any problems at all & it drives great, but curiosity got the better of me on this one.
thanks
Sent from my iPhone using Tapatalk - now Free
1. When trying to change gear at a higher rpm, the rev needle comes down from about 4.5-5ish K rpm down to 0. Is that normal? As far as I know the car hasn't been tuned.
2. When the revs go past 4k or so, the traction control turns off by itself.
Hasn't caused me any problems at all & it drives great, but curiosity got the better of me on this one.
thanks
Sent from my iPhone using Tapatalk - now Free